spec no: dsab8691 rev no: v.4 date: mar/16 /200 5 page: 1 of 6 approved: j. lu checked: allen liu drawn: b.h.li kpefa - 3029seevgepbgc hyper o range green blue package dimension s attention observe precautions for handling electrostatic discharge sensitive device s description the hyper orange source color devices are made with dh ingaalp on gaas substrate light emitting diode. the green source color devices are made with ingan on sic light emitting diode. the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. preliminary spe c 3.0mmx2.9mm full - color surface mount led lamp features low power consumption. 3.0mmx2.9mm smt led, 2.0mm thickness. can produce any color in visible spectrum, including white light. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. specifications are subjected to change without notice.
spec no: dsab8691 rev no: v.4 date: mar/16 /200 5 page: 2 of 6 approved: j. lu checked: allen liu drawn: b.h.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter hyper orange green blue units power dissipation 150 120 102 mw dc forward current 30 30 30 ma peak forward current [1] 195 150 150 ma reverse voltage v operating/storage temperature - 40 c to +85 c 5 part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpefa - 3029seevgepbgc hyper orange (ingaaip) water clear 110 280 green (ingan) 70 200 blue (ingan) 70 130 120 symbol parameter device typ. max. test conditions units peak peak wavelength hyper orange green blue 630 518 468 nm i f =20ma d dominant wavelength hyper orange green blue 621 525 470 nm i f =20ma ? 1/2 spectral line half - width hyper orange green blue 20 36 26 nm i f =20ma c capacitance hyper orange green blue 25 50 110 pf v f =0v;f=1mhz v f forward voltage hyper orange green blue 2.0 3.5 3.6 2.5 4.5 4.3 v i f =20ma i r reverse current all 10 ua v r = 5v
spec no: dsab8691 rev no: v.4 date: mar/16 /200 5 page: 3 of 6 approved: j. lu checked: allen liu drawn: b.h.li kpefa - 3029seevgepbgc hyper orange
spec no: dsab8691 rev no: v.4 date: mar/16 /200 5 page: 4 of 6 approved: j. lu checked: allen liu drawn: b.h.li green
spec no: dsab8691 rev no: v.4 date: mar/16 /200 5 page: 5 of 6 approved: j. lu checked: allen liu drawn: b.h.li blue
spec no: dsab8691 rev no: v.4 date: mar/16 /200 5 page: 6 of 6 approved: j. lu checked: allen liu drawn: b.h.li kpefa - 3029seevgepbgc recommended soldering pattern (units : mm) tape specifications (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
